Yes! It is certainly possible to make a custom knife rack for you. Please contact us firstname.lastname@example.org with your requirements and we'll get back to you as soon as possible!
Yes, although this would be a custom made order. Please contact us email@example.com with your requirements and we'll get back to you as soon as possible!
Currently, American Walnut and European Oak wood are the only available options to choose from.
Yes, each Paper Roller comes with one roll of paper to get you started right away. You can order refill rolls here.
To avoid bleed through we recommend Posca pens. We've never had a problem with these markers. You could also try other markers, but we haven't tested those. Just make sure to use waterbased markers instead of alcohol based markers.
The Paper Roller is attached to the wall with screws. Screws and plugs are included with your order. Please see the installation guide for more information.
Refills can be bought at our store.
The brackets of the Paper Roller are 3D printed with PLA filament by the 3D printer we built ourselves. PLA filament is a biodegradable plastic which is obtained from agricultural crops such as corn and sugar cane. It takes about 3 hours to print both pieces.
At the moment, the Paper Roller is only available in the standard 450 mm / 18 inch size. If you're in need of a different sized Paper Roller, let us know at firstname.lastname@example.org and we'll see what we can do for you.
Each lampshade is printed with the 3D printer that we built ourselves and takes about 4 hours to print. For this we’ve used PLA filament, a biodegradable plastic, which is obtained from agricultural crops such as corn and sugar cane.
No, we don't supply the light bulb. Please note to only use LED light bulbs.
Yes, it does! Lamp socket (E27), white colored cable, ceiling rose and screws for installation are all included.
You can choose the length of the cord yourself (0.5 till 3.0 meters long). Please select the correct length before placing the product in your shopping cart.
No, the Modern Lamp is only available in white. We also don't offer custom sizes for this design.
We’ve carefully selected the amount of characters you’ll receive with the Letter Chalkboard. Easy to change, each letterboard comes with 600+ letters en numbers. But just in case if you do run short of letters, you can also use chalk!
The letters are made of foam with a magnetic backing applied.
The board is made from 3mm thick steel board finished with a layer of chalkboard paint.
The Letter Chalkboard comes with:
1 magnet chalkboard
600+ white foam letters/numbers with magnetic backing
4 chalk markers
1 letter stencil
1 magnetic ruler
4 screws and plugs for mounting
The Letter Chalkboard is mounted to the wall with 4 screws, one in every corner of the board. Screws and plugs are included.
We've carefully selected the amount of letters for the Letter Chalkboard. However, if you're in need of some spare letters, send us a message at hello@studiodrijfveer and we'll look into the possibilities.
No, we don't offer custom work for the Letter Chalkboard.
Yes! The sign is made from 5mm thick aluminum with a high-quality and durable powder coat finish making it also suitable to be hung outside.
The sign will be delivered blank. You can easily apply a vinyl decal/sticker yourself (we recommend stickermule.com) or you can let your local signwriter do that for you.
Maximum print area for your design is 200 x 200 mm.
Yes, screws and plugs for the wall are included. However, depending on your wall (brick, wood, etc) you might need to use different kind of plugs.
Yes, you can! Please shoot us an e-mail at email@example.com with your desired dimensions and we'll get back to you as soon as possible.
No, not at the moment. But we are thinking about launching a black colored version of the Square Sign. If you're interested in one, let us know at firstname.lastname@example.org and we'll look into what we can do for you.
We can ship anywhere in the world but rates vary according to distance. We use PostNL and FedEx, depending on the destination country. Please see the 'Shipping & Returns' page for more information.
At this time, we can not offer our customers free shipping. Check out our shipping rates here.
Our Studio is based in Amersfoort, the Netherlands, which is also where we design and create all of our products.
Yes, we do. Please check out our 'Shipping & Returns' page for more information.
We accept payment through PayPal, Creditcard and iDeal.